You can use on -
Tile, Stone, Grout and Concrete. 

You can Not use on -
Painted Surfaces (Should not be applied to drywall or wood).

PPE -
Goggles or face mask, respirator, gloves and arm protection.  

Warning -
Will create an itchy rash, if you work directly with your skin. 

Precautions -
Keep out of reach of children and animals. 
If Inhaled -
Mild irritation. 
(Move to fresh air, if experiencing trouble breathing call 911, otherwise call poison control center). 
If in Eyes -
Avoid contact with eyes, clothing and skin, may cause inching burning.
(Immediately flush skin and eyes with water for at least 15 minutes.)
If Swallowed -
(Call a poison control center immediately, sip a glass of water if able to swallow and do not induce vomiting unless told to do so by poison control center).  

Do not drop or strike containers.

Instructions -
Scoop 1 part A to 1 part B or half & half ratio into a heavy duty paper cup. Mix contents throughly for 2min or until consistent in color. Add P.G.C for pre tenting the filler to match the area(mix throughly for 1min or until consistent in color).
Cut tip of applicator bag, apply cup upside down and squeeze filler into bag. Pinch bag above filler and drag or force it towards the tip. Make sure to prep the area (remove any damaged grout or caulk, vacuum and clean areas).
Twist end and apply pressure to the bag forcing the filler into the required voids. Apply until all voids are filled or reach end of batch.
Fill another cup with water 1-2in from the top and wet a cloth. Using your finger, dip into water cup and apply pressure to force the filler down in, but not to much force to make it low or thin. Use the wet cloth to wipe excess filler, then lightly pass over with your finger, while checking for low and missed spots. If so fill with excess and move to the next wall or area.

Working time: 30min - 45min after mixing
You can apply P.G.C over Immediately 

Price -
Contact for pricing.